Dell Inspiron 16 Plus 7640 Owners Manual - Page 81
About this task, Steps, Next steps, Installing the touchpad
View all Dell Inspiron 16 Plus 7640 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
About this task The following image(s) indicate the location of the touchpad and provides a visual representation of the installation procedure. Figure 55. Installing the touchpad Steps 1. Place the touchpad onto the palm-rest and keyboard assembly. 2. Place the touchpad bracket onto the touchpad and align the screw holes on the touchpad bracket to the screw holes on the palm-rest and keyboard assembly. 3. Replace the five screws (M2x2.5) and four screws (M2x1.8) that secure the touchpad bracket to the palm-rest and keyboard assembly. 4. Adhere the adhesive tape that secures the touchpad and touchpad bracket. 5. Place the touchpad cable on the palm-rest and keyboard assembly. 6. Connect the touchpad cable to its connector on the touchpad and close the latch. 7. Connect the touchpad cable to its connector on the system board and close the latch. Next steps 1. Install the 64 Wh battery or 90 Wh battery, whichever is applicable. 2. Install the base cover. 3. Follow the procedure in After working inside your computer. Removing and installing Field Replaceable Units (FRUs) 81