Dell Inspiron 1720 Service Manual - Page 52
Replacing a Mini Card - key board for
View all Dell Inspiron 1720 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
1 WPAN card 2 metal securing tabs (2) Replacing a Mini Card WLAN Card NOTICE: The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors on the card and on the system board, and realign the card. NOTICE: To avoid damage to the WLAN card, never place cables under the card. 1. Insert the WLAN card connector at a 45-degree angle into the system board connector labeled "WLAN". 2. Press the other end of the WLAN card down into the securing tabs until the card clicks into place. 3. Connect the appropriate antenna cables to the WLAN card you are installing: If the WLAN card has two triangles on the label (white and black), connect the white antenna cable to the connector labeled "main" (white triangle), and connect the black antenna cable to the connector labeled "aux" (black triangle). If the WLAN card has three triangles on the label (white, black, and gray), connect the white antenna cable to the white triangle, connect the black antenna cable to the black triangle, and connect the gray antenna cable to the gray triangle. 4. Secure unused antenna cables in the protective mylar sleeve. 5. Replace the cover and tighten the captive screws. Mobile Broadband or WWAN Card NOTICE: The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors on the card and on the system board, and realign the card. NOTICE: To avoid damage to the WWAN card, never place cables under the card. 1. Insert the WWAN card connector at a 45-degree angle into the system board connector labeled "WWAN". 2. Press the other end of the WWAN card down into the securing tabs until the card clicks into place. 3. Connect the black antenna cable with a gray stripe to the connector labeled "aux" (black triangle) and connect the white antenna cable with a gray stripe to the connector labeled "main" (white triangle). 4. Secure unused antenna cables in the protective mylar sleeve. 5. Replace the cover and tighten the captive screws.