Dell Inspiron 1720 Service Manual - Page 63

Speaker Assembly

Page 63 highlights

Back to Contents Page Speaker Assembly Dell™ Vostro™ 1700 and Inspiron™ 1720/1721 Service Manual Removing the Speaker Assembly Replacing the Speaker Assembly Removing the Speaker Assembly CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide. 1. Follow the instructions in Before You Begin. 2. Remove the optical drive (see Removing the Optical Drive). 3. Remove the hard drive (see Removing a Hard Drive). 4. Remove the hinge cover (see Removing the Hinge Cover). 5. Remove the keyboard (see Removing the Keyboard). 6. Remove the display assembly (see Removing the Display Assembly). 7. Remove the internal card with Bluetooth wireless technology, if installed (see Removing the Bluetooth Card). 8. Remove the palm rest (see Removing the Palm Rest). 9. Disconnect the speaker cable from the system board. 10. Remove the two M2.5 x 5-mm screws that secure the speaker assembly to the base of the computer. 11. Remove the speaker assembly. 1 M2.5 x 5-mm screws (2) 2 speaker connector 3 speaker assembly Replacing the Speaker Assembly CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide. 1. Align the guide holdes in the speaker assembly with the guide posts on the base of the computer, then lower the assembly into place. 2. Replace the two M2.5 x 5-mm screws to secure the speaker assembly to the base of the computer.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68

Back to Contents Page
Speaker Assembly
Dell™ Vostro™ 1700 and Inspiron™ 1720/1721 Service Manual
Removing the Speaker Assembly
Replacing the Speaker Assembly
Removing the Speaker Assembly
1.
Follow the instructions in
Before You Begin
.
2.
Remove the optical drive (see
Removing the Optical Drive
).
3.
Remove the hard drive (see
Removing a Hard Drive
).
4.
Remove the hinge cover (see
Removing the Hinge Cover
).
5.
Remove the keyboard (see
Removing the Keyboard
).
6.
Remove the display assembly (see
Removing the Display Assembly
).
7.
Remove the internal card with Bluetooth wireless technology, if installed (see
Removing the Bluetooth Card
).
8.
Remove the palm rest (see
Removing the Palm Rest
).
9.
Disconnect the speaker cable from the system board.
10.
Remove the two M2.5 x 5-mm screws that secure the speaker assembly to the base of the computer.
11.
Remove the speaker assembly.
Replacing the Speaker Assembly
1.
Align the guide holdes in the speaker assembly with the guide posts on the base of the computer, then lower the assembly into place.
2.
Replace the two M2.5 x 5-mm screws to secure the speaker assembly to the base of the computer.
CAUTION:
Before you begin the following procedure, follow the safety instructions in the
Product Information Guide
.
1
M2.5 x 5-mm screws (2)
2
speaker connector
3
speaker assembly
CAUTION:
Before you begin the following procedure, follow the safety instructions in the
Product Information Guide
.