Dell Inspiron 560s Service Manual - Page 14

Replacing the Computer Cover

Get Dell Inspiron 560s PDF manuals and user guides View all Dell Inspiron 560s manuals
Add to My Manuals
Save this manual to your list of manuals

Page 14 highlights

5. Release the computer cover by pulling it away from the front of the computer and lifting it up. 6. Set the cover aside in a secure location. Replacing the Computer Cover 1. Follow the procedures in Before You Begin. 2. Ensure that all cables are connected, and fold cables out of the way. 3. Ensure that no tools or extra parts are left inside the computer. 4. Align the tabs at the bottom of the computer cover with the slots located along the edge of the computer. 5. Press the computer cover down and slide it towards the front of the computer until you feel a click or feel the computer cover securely installed. 6. Ensure that the cover is seated correctly. 7. Replace the two screws that secure the computer cover, using a screwdriver. 1 screws (2) 2 computer cover 3 slot 4 front of the computer 8. Open the chassis feet. 9. Place the computer in an upright position. CAUTION: Ensure that none of the system air-vents are blocked. Blocking them would cause serious thermal problems. Back to Contents Page

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
5.
Release the computer cover by pulling it away from the front of the computer and lifting it up.
6.
Set the cover aside in a secure location.
Replacing the Computer Cover
1.
Follow the procedures in
Before You Begin
.
2.
Ensure that all cables are connected, and fold cables out of the way.
3.
Ensure that no tools or extra parts are left inside the computer.
4.
Align the tabs at the bottom of the computer cover with the slots located along the edge of the computer.
5.
Press the computer cover down and slide it towards the front of the computer until you feel a click or feel the computer cover securely installed.
6.
Ensure that the cover is seated correctly.
7.
Replace the two screws that secure the computer cover, using a screwdriver.
8.
Open the chassis feet.
9.
Place the computer in an upright position.
Back to Contents Page
1
screws (2)
2
computer cover
3
slot
4
front of the computer
CAUTION:
Ensure that none of the system air-vents are blocked. Blocking them would cause serious thermal problems.