Dell Inspiron 560s Service Manual - Page 4

Back to Contents Page Front Bezel Dell™ Inspiron™ 560s Service Manual Removing the Front Bezel Replacing the Front Bezel WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. WARNING: To guard against electrical shock, always unplug your computer from the electrical outlet before removing the cover. WARNING: Do not operate your equipment with any cover(s) (including computer covers, bezels, filler brackets, front-panel inserts, etc.) removed. CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ is not covered by your warranty. Removing the Front Bezel 1. Follow the procedures in Before You Begin. 2. Remove the computer cover (see Removing the Computer Cover). 3. Grasp and lift the front-bezel grips one at a time to release them from the chassis. 4. Rotate and pull the front bezel away from the front of the computer to release the front-bezel clamps from the front-bezel inserts. 1 front-bezel inserts (3) 2 front-bezel clamps (3) 3 front-bezel grips (3) 4 front bezel 5. Set the front bezel aside in a secure location. Replacing the Front Bezel 1. Follow the procedures in Before You Begin. 2. Align and insert the front-bezel clamps into the front-bezel inserts. 3. Rotate the front bezel towards the computer until the front-bezel grips snap into place. 4. Replace the computer cover (see Replacing the Computer Cover). 5. Connect your computer and devices to electrical outlets, and then turn them on.