Dell Inspiron 560s Service Manual - Page 6

Back to Contents Page Support Bracket Dell™ Inspiron™ 560s Service Manual Removing the Support Bracket Replacing the Support Bracket WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. WARNING: To guard against electrical shock, always unplug your computer from the electrical outlet before removing the cover. WARNING: Do not operate your equipment with any cover(s) (including computer covers, bezels, filler brackets, front-panel inserts, etc.) removed. Removing the Support Bracket 1. Follow the procedures in Before You Begin. 2. Remove the computer cover (see Removing the Computer Cover). 3. Pull back the support-bracket release latch and pivot the support bracket up. 4. Lift the support bracket off the hinge-tab slots and set it aside in a secure place. 1 support-bracket release latch 2 hinge-tab slots (2) 3 hinge tabs (2) 4 support bracket Replacing the Support Bracket 1. Follow the procedures in Before You Begin. 2. Align and insert the hinge tabs at the bottom of the support bracket into the hinge-tab slots located along the edge of the computer. 3. Pull back the support-bracket release latch and pivot the support bracket downward, until the support-bracket release latch locks into place.