Dell Latitude XPi Reference Guide - Page 82

Error M essages, RAM Test Group, Analog Sound Playback Test

Page 82 highlights

Test Groups Audio Table 4-2. Dell Diagnostics Tests (Continued) Subtests Description Software Reset Test Compatibility ID Test Interrupt Test DMA Test FIFO RAM Test Initial Reset Status Test Internal Register Test Dual Channel Test Tests the operation of the audio chip set. FM Sound Playback Test Analog Sound Playback Test Record and Playback Test Tests the record and playback ability of the internal microphone and speakers. NOTE: For the full name of an abbreviation or acronym used in this table, see the Glossary in the online System User's Guide. Error Messages When you run a test group or subtest in the diagnostics, error messages may result. These particular error messages are not covered in this guide because the errors that generate these messages can be resolved only with a technician's assistance. Record the messages on a copy of the Diagnostics Checklist found in Chapter 5, and read that chapter for instructions on obtaining technical assistance. RAM Test Group The RAM Test Group subtests check all the directly addressable RAM. You should run the stand-alone RAM Test program (ramtest.exe) from the MS-DOS prompt if, for some reason, the diagnostics cannot load into memory. The RAM Test program has switches so that you can set both test limits and options for the subtests from the MS-DOS prompt. The switches listed in Table 4-3 can be added to the end of the ramtest command line. The switches can be used in any order, but they must be separated by a space. For example, to run the RAM comprehensive subtest 10 times without pausing, stopping at a maximum of 20 errors, and outputting the results to a file named ramtst.rpt, type the following command line at the MS-DOS prompt and press : ramtest -r10 -np -m20 -oframtst.rpt To view the Help screen that lists all of the ramtest command-line switches, type the following command at the MS-DOS prompt and press : ramtest? 4-12 Dell Latitude XPi CD Reference and Troubleshooting Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148

4-12
Dell Latitude XPi CD Reference and Troubleshooting Guide
E
rror Messages
When you run a test group or subtest in the diagnostics,
error messages may result. These particular error mes-
sages are not covered in this guide because the errors that
generate these messages can be resolved only with a
technician’s assistance. Record the messages on a copy of
the Diagnostics Checklist found in Chapter 5, and read
that chapter for instructions on obtaining technical
assistance.
R
AM Test Group
The RAM Test Group subtests check all the directly
addressable RAM. You should run the stand-alone RAM
Test program (
ramtest.exe
) from the MS-DOS prompt if, for
some reason, the diagnostics cannot load into memory.
The RAM Test program has switches so that you can set
both test limits and options for the subtests from the
MS-DOS prompt. The switches listed in Table 4-3 can be
added to the end of the
ramtest
command line.
The switches can be used in any order, but they must be
separated by a space.
For example, to run the RAM comprehensive subtest
10 times without pausing, stopping at a maximum of
20 errors, and outputting the results to a file named
ramtst.rpt
, type the following command line at the MS-DOS
prompt and press <
ENTER
>:
ramtest -r10 -np -m20 -oframtst.rpt
To view the Help screen that lists all of the
ramtest
command-line switches, type the following command at the
MS-DOS prompt and press <
ENTER
>:
ramtest?
Audio
Software Reset Test
Compatibility ID Test
Interrupt Test
DMA Test
FIFO RAM Test
Initial Reset Status Test
Internal Register Test
Dual Channel Test
FM Sound Playback Test
Analog Sound Playback Test
Record and Playback Test
Tests the operation of the audio chip set.
Tests the record and playback ability of
the internal microphone and speakers.
Table 4-2.
Dell Diagnostics Tests
(Continued)
Test Groups
Subtests
Description
NOTE: For the full name of an abbreviation or acronym used in this table, see the Glossary in the online
System User’s Guide
.