Dell OptiPlex 5080 Tower Service Manual - Page 22
Removing the 2.5-inch hard-disk drive bracket, Steps, Prerequisites
![]() |
View all Dell OptiPlex 5080 Tower manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Steps 1. Disconnect the hard-drive data and power cables from the connectors on the 2.5-inch hard-disk drive module. 2. Press the release tabs on both the sides of the hard-disk drive bracket to release it from the slots on the computer chassis. 3. Tilt the hard-disk drive assembly slightly at an angle. 4. Lift the hard-disk drive assembly from the computer. NOTE: Note the orientation of the hard-disk drive so that you can replace it correctly. Removing the 2.5-inch hard-disk drive bracket Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the side cover. 3. Remove the fan duct. 4. Remove the 2.5 in. hard-disk drive assembly. 22 Disassembly and reassembly
![](/manual_guide/products/dell-optiplex-5080-tower-service-manual-8c51e62/22.png)
Steps
1.
Disconnect the hard-drive data and power cables from the connectors on the 2.5-inch hard-disk drive module.
2.
Press the release tabs on both the sides of the hard-disk drive bracket to release it from the slots on the computer chassis.
3.
Tilt the hard-disk drive assembly slightly at an angle.
4.
Lift the hard-disk drive assembly from the computer.
NOTE:
Note the orientation of the hard-disk drive so that you can replace it correctly.
Removing the 2.5-inch hard-disk drive bracket
Prerequisites
1.
Follow the procedure in
before working inside your computer
.
2.
Remove the
side cover
.
3.
Remove the
fan duct
.
4.
Remove the
2.5 in. hard-disk drive assembly
.
22
Disassembly and reassembly