Dell OptiPlex 5080 Tower Service Manual - Page 38
Graphics card, Removing the graphics card
![]() |
View all Dell OptiPlex 5080 Tower manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
NOTE: The pin-1 corner of the processor has a triangle that aligns with the triangle on the pin-1 corner on the processor socket. When the processor is properly seated, all four corners are aligned at the same height. If one or more corners of the processor are higher than the others, the processor is not seated properly. 3. When the processor is fully seated in the socket, pivot the release-lever down and place it under the tab on the processor cover. Next steps 1. Install the processor fan and heat-sink assembly. 2. Install the fan duct. 3. Install the side cover. 4. Follow the procedure in after working inside your computer. Graphics card Removing the graphics card Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the side cover. 3. Remove the fan duct. About this task The following images indicate the location of the graphics card and provides a visual representation of the removal procedure. 38 Disassembly and reassembly
![](/manual_guide/products/dell-optiplex-5080-tower-service-manual-8c51e62/38.png)