Dell OptiPlex 5080 Tower Service Manual - Page 66
Steps, Disconnect all the cables that are connected to the system board.
View all Dell OptiPlex 5080 Tower manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Steps 1. Remove the two (#6-32) screws that secure the front I/O-bracket to the chassis. 2. Slide and remove the front I/O-bracket from the chassis. 3. Disconnect all the cables that are connected to the system board. 4. Remove the M.2 card standoff (#6-32) screw and eight (#6-32) screws that secure the system board to the chassis. 66 Disassembly and reassembly
Steps
1.
Remove the two (#6-32) screws that secure the front I/O-bracket to the chassis.
2.
Slide and remove the front I/O-bracket from the chassis.
3.
Disconnect all the cables that are connected to the system board.
4.
Remove the M.2 card standoff (#6-32) screw and eight (#6-32) screws that secure the system board to the chassis.
66
Disassembly and reassembly