Dell OptiPlex 5080 Tower Service Manual - Page 69
Route and connect all the cables to the connectors on the system board.
View all Dell OptiPlex 5080 Tower manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Steps 1. Slide the front I/O-ports on the system board into the front I/O-slots on the chassis and align the screw holes on the system board with the screw holes on the chassis. 2. Replace the M.2 card standoff (#6-32) screw and eight (#6-32) screws that secure the system board to the chassis. 3. Route and connect all the cables to the connectors on the system board. Disassembly and reassembly 69
Steps
1.
Slide the front I/O-ports on the system board into the front I/O-slots on the chassis and align the screw holes on the
system board with the screw holes on the chassis.
2.
Replace the M.2 card standoff (#6-32) screw and eight (#6-32) screws that secure the system board to the chassis.
3.
Route and connect all the cables to the connectors on the system board.
Disassembly and reassembly
69