Dell OptiPlex 5080 Tower Service Manual - Page 40
Graphical processing unit, Removing the powered GPU
View all Dell OptiPlex 5080 Tower manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Steps 1. Align the graphics card with the PCI-Express card connector on the system board. 2. Using the alignment post, connect the graphics card in the connector and press down firmly. Ensure that the card is firmly seated. 3. Lift the pull tab to close the PCIe door. Next steps 1. Install the fan duct. 2. Install the side cover. 3. Follow the procedure in after working inside your computer. Graphical processing unit Removing the powered GPU Prerequisites 1. Follow the procedure in before working inside your computer. 40 Disassembly and reassembly
Steps
1.
Align the graphics card with the PCI-Express card connector on the system board.
2.
Using the alignment post, connect the graphics card in the connector and press down firmly. Ensure that the card is firmly
seated.
3.
Lift the pull tab to close the PCIe door.
Next steps
1.
Install the
fan duct
.
2.
Install the
side cover
.
3.
Follow the procedure in
after working inside your computer
.
Graphical processing unit
Removing the powered GPU
Prerequisites
1.
Follow the procedure in
before working inside your computer
.
40
Disassembly and reassembly