Dell OptiPlex 5080 Tower Service Manual - Page 59
Optional I/O modules (Type C/ HDMI/VGA/DP/Serial), Removing optional I/O modules (Type C/ HDMI/VGA/
![]() |
View all Dell OptiPlex 5080 Tower manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Steps 1. Insert the intrusion switch into its slot and slide the switch to secure it into the slot. 2. Connect the intruder cable to the connector on the system board. Next steps 1. Install the fan duct. 2. Install the side cover. 3. Follow the procedure in after working inside your computer. Optional I/O modules (Type C/ HDMI/VGA/DP/Serial) Removing optional I/O modules (Type C/ HDMI/VGA/DP/Serial) Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the side cover. 3. Remove the front bezel. 4. Remove the fan duct. About this task The following images indicate the location of the optional I/O Modules and provides a visual representation of the removal procedure. Steps 1. Remove the two (M3X3) screws that secure the optional i/O module to the computer chassis. 2. Disconnect the I/O-module cable from the connector on the system board. Disassembly and reassembly 59
![](/manual_guide/products/dell-optiplex-5080-tower-service-manual-8c51e62/59.png)