Dell OptiPlex 5080 Tower Service Manual - Page 24
-inch hard drive, Removing the 3.5-inch hard-disk drive
View all Dell OptiPlex 5080 Tower manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Steps 1. Align the hard-drive assembly at an angle to the slot on the computer. 2. Press the release tabs on the hard-disk drive bracket and slightly align back to insert the hard-disk drive assembly to the slot on the computer chassis. 3. Connect the hard-drive data and power cables to the connectors on the 2.5-inch hard-disk drive module. Next steps 1. Install the fan duct. 2. Install the side cover. 3. Follow the procedure in after working inside your computer. 3.5-inch hard drive Removing the 3.5-inch hard-disk drive Prerequisites 1. Follow the procedure in before working inside your computer. 24 Disassembly and reassembly
Steps
1.
Align the hard-drive assembly at an angle to the slot on the computer.
2.
Press the release tabs on the hard-disk drive bracket and slightly align back to insert the hard-disk drive assembly to the slot
on the computer chassis.
3.
Connect the hard-drive data and power cables to the connectors on the 2.5-inch hard-disk drive module.
Next steps
1.
Install the
fan duct
.
2.
Install the
side cover
.
3.
Follow the procedure in
after working inside your computer
.
3.5-inch hard drive
Removing the 3.5-inch hard-disk drive
Prerequisites
1.
Follow the procedure in
before working inside your computer
.
24
Disassembly and reassembly