Dell OptiPlex 5080 Tower Service Manual - Page 57
Intrusion switch, Removing the intrusion switch
![]() |
View all Dell OptiPlex 5080 Tower manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Steps 1. Slide the power-supply unit into the chassis until the securing tab snaps into position. 2. Replace the three (#6-32) screws to secure the power-supply unit to the chassis. 3. Route the power cable through the routing guides on the chassis and connect the power cables to their respective connectors on the system board. Next steps 1. Install the fan duct. 2. Install the side cover. 3. Follow the procedure in after working inside your computer. Intrusion switch Removing the intrusion switch Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the side cover. 3. Remove the fan duct. About this task The following images indicate the location of the intrusion switch and provides a visual representation of the removal procedure. Disassembly and reassembly 57
![](/manual_guide/products/dell-optiplex-5080-tower-service-manual-8c51e62/57.png)