Dell OptiPlex 5080 Tower Service Manual - Page 70
Next steps, M.2 2280 SSD
![]() |
View all Dell OptiPlex 5080 Tower manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
4. Align the front I/O-bracket with the slots on the chassis. 5. Replace the two (#6-32) screws to secure the front I/O-bracket to the chassis. Next steps 1. Install the processor. 2. Install the processor fan and heat-sink assembly. 3. Install the coin-cell battery. 4. Install the graphics card/powered GPU. 5. Install the M.2 2230 SSD/M.2 2280 SSD. 6. Install the wireless. 7. Install the memory module. 8. Install the fan duct 9. Install the front bezel. 10. Install the side cover. 11. Follow the procedure in after working inside your computer. NOTE: Your computer's Service Tag is stored in the system board. You must enter the Service Tag in the BIOS setup program after you replace the system board. NOTE: Replacing the system board removes any changes that you have made to the BIOS using the BIOS setup program. You must make the appropriate changes again after you replace the system board. 70 Disassembly and reassembly
![](/manual_guide/products/dell-optiplex-5080-tower-service-manual-8c51e62/70.png)