Dell OptiPlex 5080 Tower Service Manual - Page 32
SD card reader (optional), Removing the SD card reader
![]() |
View all Dell OptiPlex 5080 Tower manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Steps 1. Align the notch on the memory module with the tab on the memory-module slot. 2. Slide the memory module firmly into the slot at an angle and press the memory module down until it clicks into place. NOTE: If you do not hear the click, remove the memory module and reinstall it. Next steps 1. Install the fan duct. 2. Install the side cover. 3. Follow the procedure in after working inside your computer. SD card reader (optional) Removing the SD card reader Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the side cover. 3. Remove the fan duct. About this task The following images points to the location of the SD card reader and provide a visual representation of the removal procedure. Steps 1. Remove the (M3x3) screw and open the metal bracket securing the SD card reader slot. 32 Disassembly and reassembly
![](/manual_guide/products/dell-optiplex-5080-tower-service-manual-8c51e62/32.png)