Dell OptiPlex 5080 Tower Service Manual - Page 26
Solid-state drive, Removing the M.2 2230 PCIe solid-state drive
View all Dell OptiPlex 5080 Tower manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Steps 1. Hold the 3.5-inch hard drive against the chassis and align the four (#6-32) grommet screws on the hard-disk drive with the screw holes on the chassis. 2. Slide the 3.5-inch hard-disk drive down to lock the four grommet screws on to its screw holes on the chassis. 3. Connect the power cable and data cable to the connectors on the hard-disk drive module. Next steps 1. Install the fan duct. 2. Install the side cover. 3. Follow the procedure in after working inside your computer. Solid-state drive Removing the M.2 2230 PCIe solid-state drive Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the side cover. 3. Remove the fan duct. About this task The following images indicate the location of the solid-state drive and provide a visual representation of the removal procedure. 26 Disassembly and reassembly