Dell OptiPlex 9030 All In One Dell OptiPlex 9030 All-In-One Owners Manual - Page 15
Installing the Power and OSD Buttons Board, Removing the System-Board Shield
View all Dell OptiPlex 9030 All In One manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
3. Perform the following steps as shown in the illustration: a. Remove the tape that secures the power and OSD buttons board to the computer [1]. b. Lift the power and OSD buttons board from the chassis [2]. c. Disconnect the cable from the power and OSD buttons board to remove it from the computer [3]. Installing the Power and OSD Buttons Board 1. Insert the power and OSD buttons board into its slot and fix the tape to secure it. 2. Connect the cable to the power and OSD buttons board. 3. Install: a. back cover b. VESA stand 4. Follow the procedures in After Working Inside Your Computer. Removing the System-Board Shield 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the: a. VESA stand b. back cover 15
3.
Perform the following steps as shown in the illustration:
a.
Remove the tape that secures the power and OSD buttons board to the computer [1].
b.
Lift the power and OSD buttons board from the chassis [2].
c.
Disconnect the cable from the power and OSD buttons board to remove it from the computer
[3].
Installing the Power and OSD Buttons Board
1.
Insert the power and OSD buttons board into its slot and fix the tape to secure it.
2.
Connect the cable to the power and OSD buttons board.
3.
Install:
a.
back cover
b.
VESA stand
4.
Follow the procedures in
After Working Inside Your Computer
.
Removing the System-Board Shield
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the:
a.
VESA stand
b.
back cover
15