Dell OptiPlex 9030 All In One Dell OptiPlex 9030 All-In-One Owners Manual - Page 17

Installing the Converter Board, After Working Inside Your Computer

Get Dell OptiPlex 9030 All In One PDF manuals and user guides View all Dell OptiPlex 9030 All In One manuals
Add to My Manuals
Save this manual to your list of manuals

Page 17 highlights

3. Disconnect the cables from the converter board. 4. Perform the following steps as shown in the illustration: a. Disconnect the display-backlight cable from the connectors on the converter board [1]. b. Disconnect the converter-board cable from the connectors on the converter board [2]. c. Remove the screws that secure the converter board to the computer [3]. d. Lift the converter board away from the computer [4]. Installing the Converter Board 1. Place the convertor board into its place. 2. Tighten the screws to secure the converter board to the computer. 3. Connect the converter-board cable and display-backlight cable to the connectors on the converter board. 4. Install the: a. back cover b. VESA stand 5. Follow the procedures in After Working Inside Your Computer. 17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
3.
Disconnect the cables from the converter board.
4.
Perform the following steps as shown in the illustration:
a.
Disconnect the display-backlight cable from the connectors on the converter board [1].
b.
Disconnect the converter-board cable from the connectors on the converter board [2].
c.
Remove the screws that secure the converter board to the computer [3].
d.
Lift the converter board away from the computer [4].
Installing the Converter Board
1.
Place the convertor board into its place.
2.
Tighten the screws to secure the converter board to the computer.
3.
Connect the converter-board cable and display-backlight cable to the connectors on the converter
board.
4.
Install the:
a.
back cover
b.
VESA stand
5.
Follow the procedures in
After Working Inside Your Computer
.
17