Dell OptiPlex 9030 All In One Dell OptiPlex 9030 All-In-One Owners Manual - Page 19
Disconnect the optical-drive cables from the connector on the system board [1] [2].
View all Dell OptiPlex 9030 All In One manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
3. Perform the following steps as shown in the illustration: a. Press the securing tab down to release the optical drive [1]. b. Slide the optical drive outward to remove it from the computer [2]. 4. Perform the following steps as shown in the illustration: a. Disconnect the optical-drive cables from the connector on the system board [1] [2]. b. Unthread the cable from the notches of the computer [3]. 19
3.
Perform the following steps as shown in the illustration:
a.
Press the securing tab down to release the optical drive [1].
b.
Slide the optical drive outward to remove it from the computer [2].
4.
Perform the following steps as shown in the illustration:
a.
Disconnect the optical-drive cables from the connector on the system board [1] [2].
b.
Unthread the cable from the notches of the computer [3].
19