Dell OptiPlex 9030 All In One Dell OptiPlex 9030 All-In-One Owners Manual - Page 20
Installing the Optical Drive, Removing the Hard Drive
View all Dell OptiPlex 9030 All In One manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
5. Remove the screws that secure the optical-drive cable to the system and unthread the cables from the notches. Installing the Optical Drive 1. Align and slide the optical drive into its slot. 2. Connect the optical-drive cable. 3. Lock and secure the optical drive to the computer. 4. Install the: a. back cover b. VESA stand 5. Follow the procedures in After Working Inside Your Computer. Removing the Hard Drive 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the: a. VESA stand b. back cover c. VESA mount bracket 3. Unthread the cables from the notches on the hard-drive bracket. Disconnect the hard-drive cables from the hard drive. 20
5.
Remove the screws that secure the optical-drive cable to the system and unthread the cables from
the notches.
Installing the Optical Drive
1.
Align and slide the optical drive into its slot.
2.
Connect the optical-drive cable.
3.
Lock and secure the optical drive to the computer.
4.
Install the:
a.
back cover
b.
VESA stand
5.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Hard Drive
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the:
a.
VESA stand
b.
back cover
c.
VESA mount bracket
3.
Unthread the cables from the notches on the hard-drive bracket. Disconnect the hard-drive cables
from the hard drive.
20