Dell OptiPlex 9030 All In One Dell OptiPlex 9030 All-In-One Owners Manual - Page 32
Removing the Speakers
View all Dell OptiPlex 9030 All In One manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Removing the Speakers 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the: a. VESA stand b. back cover c. VESA mount bracket d. system-board shield e. I/O board shield f. speaker cover 3. Perform the following steps as shown in the illustration: a. Disconnect the speaker cables from the connector on the system board [1]. b. Unthread the cables from the notches [2]. 32
Removing the Speakers
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the:
a.
VESA stand
b.
back cover
c.
VESA mount bracket
d.
system-board shield
e.
I/O board shield
f.
speaker cover
3.
Perform the following steps as shown in the illustration:
a.
Disconnect the speaker cables from the connector on the system board [1].
b.
Unthread the cables from the notches [2].
32