Dell OptiPlex 9030 All In One Dell OptiPlex 9030 All-In-One Owners Manual - Page 25
Removing the Processor Fan
View all Dell OptiPlex 9030 All In One manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
3. Install: a. system-board shield b. VESA mount bracket c. back cover d. VESA stand 4. Follow the procedures in After Working Inside Your Computer. Removing the Processor Fan 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the: a. VESA stand b. back cover c. VESA mount bracket d. system-board shield 3. Perform the following steps as shown in the illustration: a. Disconnect the power-supply cable from the connector on the system board [1][2]. b. Unthread the cable from the hooks in the computer [3]. 25
3.
Install:
a.
system-board shield
b.
VESA mount bracket
c.
back cover
d.
VESA stand
4.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Processor Fan
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the:
a.
VESA stand
b.
back cover
c.
VESA mount bracket
d.
system-board shield
3.
Perform the following steps as shown in the illustration:
a.
Disconnect the power-supply cable from the connector on the system board [1][2].
b.
Unthread the cable from the hooks in the computer [3].
25