Dell OptiPlex 9030 All In One Dell OptiPlex 9030 All-In-One Owners Manual - Page 26
Installing the Processor Fan, Removing the Power-Supply Fan
View all Dell OptiPlex 9030 All In One manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
4. Perform the following steps as shown in the illustration: a. Disconnect the processor-fan cable from the connector on the system board [1]. b. Remove the screws that secure the processor fan to the system board [2]. c. Lift the processor fan away from the computer [3]. Installing the Processor Fan 1. Place the processor fan on the computer and tighten the screws to secure the processor fan to the system board. 2. Connect the processor-fan cable to the connector on the system board. 3. Connect the power-supply cable to the connector on the system board and thread the cable on the hooks in the computer. 4. Install: a. system-board shield b. VESA mount bracket c. back cover d. VESA stand 5. Follow the procedures in After Working Inside Your Computer. Removing the Power-Supply Fan 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the: a. VESA stand b. back cover c. VESA mount bracket d. system-board shield 26