Dell OptiPlex 9030 All In One Dell OptiPlex 9030 All-In-One Owners Manual - Page 22
Removing the Intrusion Switch
View all Dell OptiPlex 9030 All In One manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
7. Install: a. VESA mount bracket b. back cover c. VESA stand 8. Follow the procedures in After Working Inside Your Computer. Removing the Intrusion Switch 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the: a. VESA stand b. back cover c. VESA mount bracket d. system-board shield 3. Disconnect the intrusion-switch cable from the connector on the system board. Unthread the cable from the notches on the computer. 22
7.
Install:
a.
VESA mount bracket
b.
back cover
c.
VESA stand
8.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Intrusion Switch
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the:
a.
VESA stand
b.
back cover
c.
VESA mount bracket
d.
system-board shield
3.
Disconnect the intrusion-switch cable from the connector on the system board. Unthread the cable
from the notches on the computer.
22