Dell PowerApp 110 Rack Installation Guide - Page 12

Attaching the Brackets 1. Locate one of the two brackets and align it over the two threaded holes on the side of the appliance (see Figure 1-3). 2. Secure the bracket to the appliance chassis using two 10-24 x 0.375-inch screws (see Figure 1-3). Repeat this step to install the remaining bracket on the other side of the appliance. 12-24 x 0.5-inch pan-head Phillips screws 10-24 x 0.375-inch pan-head Phillips screws (2 per bracket) Figure 1-3. Securing the Appliance in the Rack Installing the Appliance in the Rack CAUTION: Due to the size and weight of the PowerApp appliance, never attempt to install the appliance by yourself. 1. Lift the appliance into position between the two posts, with the hole in the mounting bracket aligned one hole above the mark you made in the two posts. 2. Secure the appliance to the rack using a 12-24 x 0.5-inch screw through the mounting bracket to the front of the left and right posts (see Figure 1-3). 3. Attach the front bezel, if it is not already attached, to the appliance (see the Troubleshooting Guide for instructions). This completes the two-post center-mount rack installation. 1-4 Rack Installation Guide