Dell PowerApp 110 Rack Installation Guide - Page 9

Dell™ PowerApp™ 100 and 110 Appliances - Rack Installation Guide This installation guide provides instructions for trained service technicians installing one or more Dell PowerApp 100 or 110 appliances in a rack. This guide includes procedures for the following three rack kits: • Two-post center-mount • Two-post flush-mount • Four-post rack cabinet One rack kit is required for each PowerApp appliance to be installed in the rack. Two-Post Center-Mount Rack Kit Installation This procedure provides instructions for installing a Dell PowerApp appliance in a twopost open-frame relay rack, such as those found in telecommunications equipment facilities. Both 3-inch and 6-inch wide two-post racks are accommodated. The two-post open-frame relay rack must be properly secured to the floor, to the ceiling or upper wall, and where applicable, to adjacent racks, using floor and wall fasteners and bracing specified or approved by the rack manufacturer or by industry standards. Refer to the two-post open-frame relay rack manufacturer's installation documentation for precautionary warnings and information before attempting this installation. CAUTION: Do not attempt to install the PowerApp appliance into a twopost open-frame relay rack that has not been securely anchored in place. Damage to the appliance and personal injury may result. Refer to "Safety Instructions" at the front of this document for additional safety information regarding rack installation. support.dell.com Rack Installation Guide 1-1