Dell PowerApp 110 Rack Installation Guide - Page 17

Installing the Inner Rails on the Appliance Chassis, Installing the Appliance in the Rack,

Get Dell PowerApp 110 PDF manuals and user guides View all Dell PowerApp 110 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 17 highlights

Installing the Inner Rails on the Appliance Chassis 1. Locate the two inner rails and position one to the side of the chassis (see Figure 1-7). Ensure that the flat end of the inside rail is toward the front of the chassis and that the end with two threaded holes is located at the back of the chassis. The flat central part of the inside rail must be facing the chassis, with the raised upper and lower rail surface facing outward (see Figure 1-7). Figure 1-7. Securing the Inner Rails to the Appliance Chassis 2. Secure each inner rail to the chassis using two 10-32 x 0.25-inch flat-head screws. Installing the Appliance in the Rack CAUTION: Due to the size and weight of the PowerApp appliance, never attempt to install the appliance by yourself. 1. Remove the optional bezel from the appliance front panel. Press the tab on each end of the bezel and pull the bezel straight out from the chassis. 2. Lift the appliance into position in front of the installed mounting bracket. support.dell.com Rack Installation Guide 1-9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
support.dell.com
Rack Installation Guide
1-9
Installing the Inner Rails on the Appliance Chassis
1.
Locate the two inner rails and position one to the side of the chassis
(see Figure 1-7).
Ensure that the flat end of the inside rail is toward the front of the chassis and
that the end with two threaded holes is located at the back of the chassis. The
flat central part of the inside rail must be facing the chassis, with the raised upper
and lower rail surface facing outward (see Figure 1-7).
Figure 1-7.
Securing the Inner Rails to the Appliance Chassis
2.
Secure each inner rail to the chassis using two 10-32 x 0.25-inch flat-head screws.
Installing the Appliance in the Rack
CAUTION: Due to the size and weight of the PowerApp appliance, never
attempt to install the appliance by yourself.
1.
Remove the optional bezel from the appliance front panel. Press the tab on each
end of the bezel and pull the bezel straight out from the chassis.
2.
Lift the appliance into position in front of the installed mounting bracket.