Dell PowerConnect 8024 CLI Reference Guide - Page 1010

before trying to claim it. The entry is claimed by setting the owner string to a non-null value. The entry must be claimed before assigning a receiver to a sampler or poller. (Range: 1-127 characters). • rcvr_timeout-The time, in seconds, remaining before the sampler or poller is released and stops sending samples to the receiver. A management entity wanting to maintain control of the sampler is responsible for setting a new value before the old one expires. (Range: 0-4294967295 seconds). • port- The destination Layer4 UDP port for sFlow datagrams. (Range: 1-65535). Default Configuration No receivers are configured by default. The default IP address is 0.0.0.0 The default maximum datagram size is 1400. The default owner string is the empty string. The default receiver timeout is 0. The default port is 6343. Command Mode Global Configuration mode. User Guidelines This command has no user guidelines Example console(config)#sflow 1 destination owner 1 timeout 2000 console(config)#sflow 1 destination maxdatagram 500 console(config)#sflow 1 destination 30.30.30.1 560 sflow polling Use the sflow polling command to enable a new sflow poller instance for this data source if rcvr_idx is valid. Use the "no" form of this command to reset poller parameters to the defaults. Syntax sflow rcvr-index polling ethernet interfaces poll-interval 1010 Sflow Commands