Dell PowerConnect 8024 CLI Reference Guide - Page 120

Command Mode Access Method Command Prompt User EXEC Privileged EXEC The user is automatically in User EXEC mode unless the user is defined as a privileged user. console> Use the enable console# command to enter into this mode. This mode is password protected. Global Configuration From Privileged EXEC console(config)# mode, use the configure command. Line Interface From Global console(config- Configuration mode, line)# use the line command. Management Access-List From Global Configuration mode, use the management access-list command. console(configmacl)# Policy-Class-Map From Global console(config- Configuration mode, policy-classmap)# use the policy-map class command. Exit or Access Previous Mode logout Use the exit command, or press + to return to the User EXEC mode. Use the exit command, or press + to return to the Privileged EXEC mode. To exit to Global Configuration mode, use the exit command, or press + to Privileged EXEC mode. To exit to Global Configuration mode, use the exit command, or press + to Privileged EXEC mode. To exit to Global Configuration mode, use the exit command, or press + to Privileged EXEC mode. 120 Using the CLI