Dell PowerConnect 8024 CLI Reference Guide - Page 165

console(config-if-1/g1)#ip access-group aclname out 2 console(config-if-1/g1)#no ip access-group aclname out mac access-group Use the mac access-group command in Global Configuration or Interface Configuration mode to attach a specific MAC Access Control List (ACL) to an interface in a given direction. Syntax mac access-group name direction sequence no mac access-group name • name - Name of the existing MAC access list. (Range: 1-31 characters) • direction - Direction of the ACL. (Range: In or out. Default is in.) • sequence - Order of access list relative to other access lists already assigned to this interface and direction. (Range: 1-4294967295) Default Configuration This command has no default configuration. Command Mode Global Configuration mode or Interface Configuration (Ethernet, VLAN or Port Channel) mode User Guidelines An optional sequence number may be specified to indicate the order of this access-list relative to the other access-lists already assigned to this interface and direction. A lower number indicates higher precedence order. If a sequence number already is in use for this interface and direction, the specified access-list replaces the currently attached access list using that sequence number. If the sequence number is not specified for this command, a sequence number is selected that is one greater than the highest sequence number currently in use for this interface and direction. This command specified in Interface Configuration mode only affects a single interface. Example The following example assigns a MAC access group to port 1/g1 with the name DELL123. console(config)#interface 1/g1 console(config-if-1/g1)#mac access-group DELL123 ACL Commands 165