Dell PowerConnect 8024 CLI Reference Guide - Page 961

console(config)# management access-class mlist management access-list Use the management access-list command in Global Configuration mode to define an access list for management, and enter the access-list for configuration. Once in the access-list configuration mode, the denied or permitted access conditions are configured with the deny and permit commands. To remove an access list, use the no form of this command. Syntax management access-list name no management access-list name • name - The access list name. (Range: 1-32 characters) Default Configuration This command has no default configuration. Command Mode Global Configuration mode User Guidelines This command enters the access-list configuration mode, where the denied or permitted access conditions with the deny and permit commands must be defined. If no match criteria are defined the default is deny. If reentering to an access-list context, the new rules are entered at the end of the access-list. Use the management access-class command to select the active access-list. The active management list cannot be updated or removed. Examples The following example shows how to configure two management interfaces, Ethernet 1/g1 and Ethernet 2/g9. console(config)#management access-list mlist console(config-macl)# permit ethernet 1/g1 priority console(config-macl)# permit ethernet 2/g9 priority console(config-macl)# exit console(config)#management access-class mlist Management ACL Commands 961