Dell PowerConnect 8024 CLI Reference Guide - Page 980

Field Last Sample Value Interval Sample Type Startup Alarm Rising Threshold Falling Threshold Rising Event Falling Event Owner Description The statistic value during the last sampling period. For example, if the sample type is delta, this value is the difference between the samples at the beginning and end of the period. If the sample type is absolute, this value is the sampled value at the end of the period. The interval in seconds over which the data is sampled and compared with the rising and falling thresholds. The method of sampling the variable and calculating the value compared against the thresholds. If the value is absolute, the value of the variable is compared directly with the thresholds at the end of the sampling interval. If the value is delta, the value of the variable at the last sample is subtracted from the current value, and the difference compared with the thresholds. The alarm that may be sent when this entry is first set. If the first sample is greater than or equal to the rising threshold, and startup alarm is equal to rising or rising and falling, then a single rising alarm is generated. If the first sample is less than or equal to the falling threshold, and startup alarm is equal falling or rising and falling, then a single falling alarm is generated. A sampled statistic threshold. When the current sampled value is greater than or equal to this threshold, and the value at the last sampling interval is less than this threshold, a single event is generated. A sampled statistic threshold. When the current sampled value is less than or equal to this threshold, and the value at the last sampling interval is greater than this threshold, a single event is generated. The event index used when a rising threshold is crossed. The event index used when a falling threshold is crossed. The entity that configured this entry. show rmon alarm-table Use the show rmon alarm-table command in User EXEC mode to display the alarms summary table. Syntax show rmon alarm-table Default Configuration This command has no default configuration. Command Mode User EXEC mode 980 RMON Commands