Dell PowerConnect 8024 CLI Reference Guide - Page 987

Field Fragments Jabbers Dropped Collisions Description The total number of packets received during this sampling interval that were less than 64 octets in length (excluding framing bits but including FCS octets) had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error), or a bad FCS with a non-integral number of octets (AlignmentError). It is normal for etherHistoryFragments to increment because it counts both runts (which are normal occurrences due to collisions) and noise hits. The number of packets received during this sampling interval that were longer than 1518 octets (excluding framing bits but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). The total number of events in which packets were dropped by the probe due to lack of resources during this sampling interval. This number is not necessarily the number of packets dropped. It is just the number of times this condition has been detected. The best estimate of the total number of collisions on this Ethernet segment during this sampling interval. show rmon log Use the show rmon log command in User EXEC mode to display the RMON logging table. Syntax show rmon log [event] • event - Event index. (Range: 1-65535) Default Configuration This command has no default configuration. Command Mode User EXEC mode User Guidelines This command has no user guidelines. Example The following examples display the RMON logging table. console> show rmon log Maximum table size: 100 Event Description Time RMON Commands 987