Dell PowerConnect 8024 CLI Reference Guide - Page 163

Syntax {deny | permit} {srcmac srcmacmask | any} {dstmac dstmacmask | any | bpdu } [{ethertypekey | 0x0600-0xFFFF }] [ vlan eq 0-4095 ] [cos 0-7] [secondary-vlan eq 0-4095 ] [secondary-cos 0-7] [log] [ assign-queue queue-id ] [{mirror |redirect} interface ] • srcmac - Valid source MAC address in format xxxx.xxxx.xxxx. • srcmacmask - Valid MAC address bitmask for the source MAC address in format xxxx.xxxx.xxxx. • any - Packets sent to or received from any MAC address • dstmac - Valid destination MAC address in format xxxx.xxxx.xxxx. • destmacmask - Valid MAC address bitmask for the destination MAC address in format xxxx.xxxx.xxxx. • bpdu - Bridge protocol data unit • ethertypekey - Either a keyword or valid four-digit hexadecimal number. (Range: Supported values are appletalk, arp, ibmsna, ipv4, ipv6, ipx, mplsmcast, mplsucast, Netbios, novell, pppoe, rarp.) • 0x0600-0xFFFF - Specify custom ethertype value (hexadecimal range 0x0600-0xFFFF) • vlan eq - VLAN number. (Range 0-4095) • cos - Class of service. (Range 0-7) • log - Specifies that this rule is to be logged. • assign-queue - Specifies particular hardware queue for handling traffic that matches the rule. • queue-id - 0-6, where n is number of user configurable queues available for that hardware platform. • mirror - Copies the traffic matching this rule to the specified interface. • redirect - Forwards traffic matching this rule to the specified physical interface. • interface - Valid physical interface in unit/port format, for example 1/g12. Default Configuration This command has no default configuration. Command Mode Mac-Access-List Configuration mode User Guidelines The no form of this command is not supported, as the rules within an ACL cannot be deleted individually. Rather the entire ACL must be deleted and respecified. ACL Commands 163