Dell PowerConnect 8024 CLI Reference Guide - Page 172

Command Mode Interface Configuration (VLAN) mode User Guidelines If the command is executed without add or remove, the command registers only the group in the bridge database. Static Multicast addresses can be defined only on static VLANs. Examples The following example registers the MAC address. console(config)#interface vlan 8 console(config-if-vlan8)#bridge multicast address 0100.5e02.0203 The following example registers the MAC address and adds ports statically. console(config)#interface vlan 8 console(config-if-vlan8)#bridge multicast address 0100.5e02.0203 add ethernet 1/g1-1/g9, 1/g2 bridge multicast filtering Use the bridge multicast filtering command in Global Configuration mode to enable filtering of Multicast addresses. To disable filtering of Multicast addresses, use the no form of the bridge multicast filtering command. Syntax bridge multicast filtering no bridge multicast filtering Default Configuration Disabled. All Multicast addresses are flooded to all ports of the relevant VLAN. Command Mode Global Configuration mode User Guidelines If switches exist on the VLAN, do not change the unregistered Multicast addresses' state to drop on the switch ports. 172 Address Table Commands