Dell PowerEdge M610x Fabric OS Message Reference - Page 200
Cvlc-1004, Cvlc-1005, Cvlc-1006, Cvlc-1007
View all Dell PowerEdge M610x manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 200 highlights
19 CVLC-1004 CVLC-1004 Message , [CVLC-1004], ,, INFO, , Forceful encryption LUN removal while re-key session is still active.\nContainer: , Initiator: , LUN ID: . Probable Cause Indicates that the encryption LUN was forcefully removed while a re-key session was still active. Recommended No action is required. Action Severity INFO CVLC-1005 Message , [CVLC-1005], ,, INFO, , There is no LUN's found from the target.\nContainer: , Initiator: , LUN ID: . Probable Cause Indicates that there are no LUNs found from the target-initiator pair. Recommended No action is required. Action Severity INFO CVLC-1006 Message , [CVLC-1006], ,, INFO, , Duplicate LUN serial number found.\nContainer: , Initiator: . Probable Cause Indicates that there is more than one LUN serial number discovered from the same target. Therefore, encryption on this target is disabled. Recommended No action is required. Action Severity WARNING CVLC-1007 Message Probable Cause , [CVLC-1007], ,, ERROR, , Removal of encryption LUN is not allowed when decrypt of existing data is enabled.\nContainer: , Initiator: , LUN ID: . Indicates that there has been an attempt to remove the encryption LUN while decryption of existing data is still enabled. 124 Fabric OS Message Reference 53-1001767-01