Dell PowerEdge M610x Fabric OS Message Reference - Page 744
ZONE-1045, Message, Probable Cause, Recommended, Action, Severity, syncdump
View all Dell PowerEdge M610x manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 744 highlights
111 ZONE-1045 ZONE-1045 Message , [ZONE-1045], ,, INFO, , The Default Zone access mode is already set to No Access. Probable Cause Indicates that the Default Zone access mode is already set to No Access. Recommended No action is required. Action Severity INFO ZONE-1046 Message , [ZONE-1046], ,, INFO, , The Default Zone access mode is already set to All Access. Probable Cause Indicates the Default Zone access mode is already set to All Access. Recommended No action is required. Action Severity INFO ZONE-1047 Message , [ZONE-1047], ,, INFO, , Switch domain () does not support defined database. Probable Cause Indicates a remote Brocade switch is running a downlevel version of Fabric OS that does not support the defined database. Recommended It is recommended to upgrade all switches to the same release level version. Action Severity INFO ZONE-1048 Message , [ZONE-1048], ,, WARNING, , SZONE ACA is rejected on the standby. Probable Cause Indicates that the standby zoning component has not received a syncdump command from the primary side. Recommended Synchronize the standby CP. Action Severity WARNING 668 Fabric OS Message Reference 53-1001767-01