Dell PowerEdge M610x Fabric OS Message Reference - Page 414
FW-1379, FW-1400, FW-1401
View all Dell PowerEdge M610x manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 414 highlights
42 FW-1379 Severity WARNING FW-1379 Message , [FW-1379], ,, INFO, , , is between high and low boundaries(High=, Low=). Current value is . Probable Cause Indicates that the number of illegal commands has changed from a value outside of the acceptable range to a value within the acceptable range. This counter tracks how many times commands allowed only on the primary fabric configuration server (FCS) switch have been executed on a non-primary FCS switch. There are many commands that can be executed only on the primary FCS switch as well as one security command that can be executed only on a backup FCS switch. The counter increments every time someone issues one of these commands on a switch where it is not allowed. Recommended No action is required. Action Severity INFO FW-1400 Message , [FW-1400], ,, INFO, , , value has changed(High=, Low=). Current value is . Probable Cause Indicates that the flash usage percentage has changed. Flash increases and decreases slightly with normal operation of the switch. Excessive permanent increases can lead to future problems. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1401 Message , [FW-1401], ,, INFO, , , is below low boundary(High=, Low=). Current value is . Probable Cause Indicates that the flash usage percentage has fallen below the low boundary. Flash increases and decreases slightly with normal operation of the switch. Excessive permanent increases can lead to future problems. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO 338 Fabric OS Message Reference 53-1001767-01