Dell PowerEdge M610x Fabric OS Message Reference - Page 711
TRCE System Messages, TRCE-1001
View all Dell PowerEdge M610x manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 711 highlights
TRCE System Messages Chapter 102 TRCE-1001 Message , [TRCE-1001], ,, WARNING, , Trace dump available< optional slot indicating on which slot the dump occurs >! (reason: ) Probable Cause Indicates that trace dump files have been generated on the switch or the indicated slot. The reason field indicates the cause for generating the dump as one of the following: • PANICDUMP generated by panic dump • WATCHDOG EXPIRED generated by hardware watchdog expiration • MANUAL generated by the tracedump -n command • TRIGGER when triggered by a specific Message ID generated by CRITICAL RASLog message or RASLog message trigger setup using the traceTrig command. Recommended Run the supportFtp command to set up automatic FTP transfers; then run the supportSave Action command and contact your switch service provider. Severity WARNING TRCE-1002 Message , [TRCE-1002], ,, INFO, , Trace dump< optional slot indicating on which slot the dump occurs > automatically transferred to FTP address ' '. Probable Cause Indicates that a trace dump has occurred on the switch or the indicated slot and it is successfully transferred from the switch automatically. Recommended No action is required. Action Severity INFO TRCE-1003 Message , [TRCE-1003], ,, ERROR, , Trace dump< optional slot indicating on which slot the dump occurs > was not transferred due to FTP error. Fabric OS Message Reference 635 53-1001767-01