Dell PowerEdge M610x Fabric OS Message Reference - Page 421
FW-1438, Message, Probable Cause, switchStatusPolicySet, Recommended, Action, Severity, switchEnable
View all Dell PowerEdge M610x manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 421 highlights
42 FW-1438 FW-1438 Message , [FW-1438], ,, WARNING, , Switch status change contributing factor Missing SFPs: missing SFPs. Probable Cause Indicates that the switch status is not in a healthy state. This occurred because the number of missing small form-factor pluggables (SFPs) is greater than or equal to the policy set by the switchStatusPolicySet command. Recommended Run the switchStatusPolicySet command to modify the SFP policy or to add SFPs to the empty Action ports. Severity WARNING FW-1439 Message , [FW-1439], ,, WARNING, , Switch status change contributing factor Switch offline. Probable Cause Indicates that the switch status is not in a healthy state. This occurred because the switch is offline. Recommended Run the switchEnable command. Action Severity WARNING FW-1440 Message , [FW-1440], ,, INFO, , state has changed to . Probable Cause Indicates that the state of the specified field-replaceable unit (FRU) has changed to "absent". Recommended No action is required. Verify that the event was planned. Action Severity INFO FW-1441 Message , [FW-1441], ,, INFO, , state has changed to . Probable Cause Indicates that the state of the specified field-replaceable unit (FRU) has changed to "inserted". This means that an FRU is inserted but not powered on. Recommended No action is required. Verify that the event was planned. Action Fabric OS Message Reference 345 53-1001767-01