Dell PowerEdge M610x Fabric OS Message Reference - Page 311
FCR-1080, FCR-1081, FCR-1082
View all Dell PowerEdge M610x manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 311 highlights
34 FCR-1080 Recommended Change the matrix database. Action Severity WARNING FCR-1080 Message , [FCR-1080], ,, WARNING, , The pause response timer for domain expired. Probable Cause Indicates that during the Coordinated HotCode protocol, a switch in the fabric has not responded to the pause message which prevented the protocol from completing. Any data traffic disruption observed during the firmware download may have been due to the result of the rejected pause message. Recommended No action is required. Action Severity WARNING FCR-1081 Message , [FCR-1081], ,, WARNING, , The pause message is rejected by the domain . Probable Cause Indicates that during the Coordinated HotCode protocol, a switch in the fabric has rejected the pause message which prevented the protocol from completing. Any data traffic disruption observed during the firmware download may have been due to the rejected pause message. Recommended No action is required. Action Severity WARNING FCR-1082 Message , [FCR-1082], ,, WARNING, , The pause retry count is exhausted for the domain . Probable Cause Indicates that during the Coordinated HotCode protocol, a switch in the fabric did not accept the pause message which prevented the protocol from completing. Any data traffic disruption observed during the firmware download may have been due to this issue. Recommended No action is required. Action Severity WARNING Fabric OS Message Reference 235 53-1001767-01