Dell PowerEdge MX7000 EMC OpenManage Enterprise-Modular Edition Version 1.20.0 - Page 121
Table 17. Command description, Optional, Command, Description
![]() |
View all Dell PowerEdge MX7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
E Upgrading networking switch using CLI 1. Upgrade the master Networking I/O Module after all the members in the chassis-group are upgraded. 2. If the chassis-group has MX5108n and MX9116n, then upgrade the MX5108n Networking I/O Modules first (non-Master) followed by upgrade of the MX9116n Networking I/O Modules. 3. If you want to upgrade multiple Networking I/O Modules, ensure that not more than two Networking I/O Modules are upgraded concurrently. Also, each Networking I/O Module must be part of different fabrics. While updating IOMs running 10.4.x to 10.5.05, you must update both IOMs in the fabric and reboot them simultaneously. 4. Perform the following steps to upgrade the Networking I/O Module. a. (Optional) Back up the current running configuration to the startup configuration in EXEC mode. Table 17. Command description Command OS10# copy running-configuration startupconfiguration b. Back up the startup configuration in EXEC mode. Description Back up the running configuration to startup configuration. Table 18. Command description Command Description OS10# copy config://startup.xml config:// Back up the startup configuration in EXEC mode. c. Download the new software image from the Dell Support Site, extract the bin files from the tar file, and save the file in EXEC mode. Table 19. Command description Command OS10# image download file-url Example: OS10# image download ftp:// userid:passwd@hostip:/filepath Description Download the new software image. NOTE: Some Windows extract applications insert extra carriage returns (CR) or line feeds (LF) when they extract the contents of a .tar file, which may corrupt the downloaded OS10 binary image. Turn off this option, if you are using a Windows-based tool to extract an OS10 binary file. d. (Optional) View the current software download status in EXEC mode. Table 20. Command description Command OS10# show image status e. Install the 10.5.0.5 software image in EXEC mode. Description View the current software download status. Table 21. Command description Command OS10# image install image-url Example: OS10# image install image://filename.bin Description Install the software image. Upgrading networking switch using CLI 121
![](/manual_guide/products/dell-poweredge-mx7000-emc-openmanage-enterprisemodular-edition-version-12000-chassis-users-guide-a1de94a/121.png)