Dell PowerEdge MX7000 EMC OpenManage Enterprise-Modular Edition Version 1.20.0 - Page 78
Restrictions and guidelines
View all Dell PowerEdge MX7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Additional chassis only have FEMs and the appear as the image below. Table 10. Fabric topology Chassis Slot Chassis 1 A1 A2 Chassis 2 A1 A2 Chassis 3-10 A1 A2 You can also use Fabric B to create a second scalable fabric: Module MX9116n FSE MX7116n FEM MX7116n FEM MX9116n FSE MX7116n FEM MX7116n FEM NOTE: The OME-Modular firmware version 1.20.00 supports additional but complex topologies. For more information, see the PowerEdge MX Network Architecture Guide available at https://www.dell.com/poweredgemanuals. Restrictions and guidelines The following restrictions and guidelines are applicable when building a scalable fabric: ● Mixing switch types in the same fabric is not supported. For example: MX9116n in slot A1 and MX5108n in slot A2 ● Mixing switch types across fabrics is supported. For example: MX9116n in slots A1& A2 and MX5108n in slots B1 & B2 ● All FSE and FEM IOMs in a scalable fabric must be in the same OME-Modular MCM group. FEMs in a chassis in MCM group 1 cannot be connected to FSEs in a chassis in MCM group 2. 78 MX Scalable Fabric architecture