Dell PowerEdge MX7000 EMC OpenManage Enterprise-Modular Edition Version 1.20.0 - Page 52
Configuring SNMP alerts, Replicate Alert Destinations
![]() |
View all Dell PowerEdge MX7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
NOTE: If Enable Authentication is selected, you must provide the user name and password to access the SMTP server. 5. Enter SMTP Port Number. 6. If the SMTP server is configured to use SSL, select the SSL option. Configuring SNMP alerts The SNMP alerts contain the service tag of the chassis as one of the parameters in the trap. Third-party consoles can use this information to correlate the traps with the system. For network IOMs and compute sleds, OME-Modular subscribes to alerts through internal private VLANs-SNMP or REST. For MXG610s fiber channel switching modules, only SNMP V1 is supported and you can configure only four SNMP alert destinations. You can configure the SNMP alert destination for IOMs from the Application Settings > Alerts > SNMP Configuration page. After configuring the SNMP destination, go to I/O Settings > Replicate Alert Destinations. To configure SNMP alerts, perform the following steps: 1. From the main menu, select Application Settings > Alerts. 2. Click SNMP Configuration. 3. Select Enable to enable the configuration. 4. Enter the Destination Address. You can configure up to four SNMP destinations. 5. Select the SNMP Version. The available SNMP versions are: ● SNMP V1 ● SNMP V2 NOTE: For MX9116n or MX5108n IOMs, only SNMP V2, is supported. NOTE: The MX7000 chassis facilitates configuration of four SNMP destinations. However, the MXG610s FC IOM switches support only three SNMP destinations. If the fourth SNMP destination is configured, the IOM ignores it. 6. Enter the Community String. When you configure the community string for SNMP V1, by default, the community string is appended with |common| FibreChannel11. 7. Select the Port Number and click Send to test the SNMP trap. Configuring sys log alerts You can configure up to four sys log destinations. To configure system log alerts, perform the following steps: 1. Click Application Settings > Alerts > Syslog Configuration. 2. Select the Enabled check box corresponding to the required server. 3. Enter the destination address or the hostname. 4. Enter the port number. 52 Logging in to OME-Modular
![](/manual_guide/products/dell-poweredge-mx7000-emc-openmanage-enterprisemodular-edition-version-12000-chassis-users-guide-a1de94a/52.png)