Dell PowerEdge VRTX Chassis Management Controller Version 1.0 for Dell PowerEd - Page 185
LCD Module and Server Status Information, Example: Dell Rack System. This is settable via CMC CLI
View all Dell PowerEdge VRTX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 185 highlights
Status information on the LCD includes descriptive information about the modules in the chassis. The tables in this section describe the information that is displayed for each component. LCD Module and Server Status Information The tables in this section describe status items that are displayed on the front panel LCD for each type of component in the chassis. Table 34. CMC Status Item Description Example: CMC1, CMC2 Name/Location. No Errors If no error occurs then "No Errors" is displayed, else lists error messages. Firmware Version Only displays on an active CMC. Displays Standby for the standby CMC. IP4 Displays current IPv4 enabled state only on an active CMC. IP4 Address: Only displays if IPv4 is enabled only on an active CMC. IP6 Displays current IPv6 enabled state only on an active CMC. IP6 Local Address: Only displays if IPv6 is enabled only on an active CMC. IP6 Global Address: Only displays if IPv6 is enabled only on an active CMC. Table 35. Chassis or Enclosure Status Item User Define Name Error Messages Model Number Power Consumption Peak Power Minimum Power Ambient Temperature Service Tag CMC redundancy mode PSU redundancy mode Description Example: "Dell Rack System". This is settable via CMC CLI or Web GUI. If no errors occur then No Errors is displayed; otherwise error messages are listed, critical errors first, then warnings. Example "PowerEdgeM1000". Current power consumption in watts. Peak power consumed in watts. Minimum power consumed in watts. Current ambient temperature in degrees Celsius. The factory-assigned service tag. Non-Redundant or Redundant. Non-Redundant, AC Redundant, or DC Redundant. 185