Dell PowerEdge VRTX Chassis Management Controller Version 1.0 for Dell PowerEd - Page 187
RACADM, Command Line Reference Guide for CMC in PowerEdge VRTX, Option Default = No Effect.
View all Dell PowerEdge VRTX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 187 highlights
Item Name Model Number Service Tag BIOS Version Last POST Code iDRAC Firmware Version IP4 IP4 Address: IP6 IP6 Local Address: IP6 Global Address: FlexAddress enabled on Fabrics Description Name of the server, which the user can set through Dell OpenManage. The name is displayed only if iDRAC has finished booting, and the server supports this feature, else iDRAC booting messages are displayed. Displays if iDRAC finished booting. Displays if iDRAC finished booting. Server BIOS firmware version. Displays the last server BIOS POST code messages string. Displays if iDRAC finished booting. NOTE: iDRAC version 1.01 is displayed as 1.1. There is no iDRAC version 1.10. Displays the current IPv4 enabled state. Only displays if IPv4 is enabled. Only displays if iDRAC supports IPv6. Displays current IPv6-enabled state. Only displays if iDRAC supports IPv6 and IPv6 is enabled. Only displays if iDRAC supports IPv6 and IPv6 is enabled. Only displays if the feature is installed. Lists the fabrics enabled for this server (that is, A, B, C). The information in the table is dynamically updated. If the server does not support this feature, then the following information does not appear, else Server Administrator options are as follows: • Option "None" = No strings must be displayed on the LCD. • Option "Default" = No Effect. • Option "Custom" = Allows you to enter a string name for the server. The information is displayed only if iDRAC has completed booting. For more information on this feature, see the RACADM Command Line Reference Guide for CMC in PowerEdge VRTX. 187