Dell PowerEdge VRTX Chassis Management Controller Version 1.0 for Dell PowerEd - Page 64
Viewing and Modifying CMC Network LAN Settings Using CMC Web Interface
View all Dell PowerEdge VRTX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
NOTE: You must have Chassis Configuration Administrator privilege to set up CMC network settings. Viewing and Modifying CMC Network LAN Settings Using CMC Web Interface To view and modify the CMC LAN network settings using CMC Web interface: 1. In the left pane, click Chassis Overview, and then click Network. The Network Configuration page displays the current network settings. 2. Modify the general, IPv4, or IPv6 settings as required. For more information, see the Online Help. 3. Click Apply Changes for each section to apply the settings. Viewing and Modifying CMC Network LAN Settings Using RACADM To view IPv4 settings, use the following subcommands and objects: • getniccfg • getconfig • cfgCurrentLanNetworking To view IPv6 settings, use the following subcommands and objects: • getconfig • cfgIpv6LanNetworking To view IPv4 and IPv6 addressing information for the chassis, use the getsysinfo subcommand. For more information about the subcommands and objects, see the Chassis Management Controller for PowerEdge VRTX RACADM Command Line Reference Guide. Enabling the CMC Network Interface To enable or disable the CMC network interface for both IPv4 and IPv6, type: racadm config -g cfgLanNetworking -o cfgNicEnable 1 racadm config -g cfgLanNetworking -o cfgNicEnable 0 NOTE: The CMC NIC is enabled by default. To enable or disable the CMC IPv4 addressing, type: racadm config -g cfgLanNetworking -o cfgNicIPv4Enable 1 racadm config -g cfgLanNetworking -o cfgNicIPv4Enable 0 NOTE: The CMC IPv4 addressing is enabled by default. To enable or disable the CMC IPv6 addressing, type: racadm config -g cfgIpv6LanNetworking -o cfgIPv6Enable 1 racadm config -g cfgIpv6LanNetworking -o cfgIPv6Enable 0 NOTE: The CMC IPv6 addressing is disabled by default. 64