Dell PowerEdge VRTX Chassis Management Controller Version 1.0 for Dell PowerEd - Page 80
Configuring iDRAC Network Settings
View all Dell PowerEdge VRTX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
3. To use a server's host name as slot name, select the Use Host Name for the Slot name option. This overrides the static slot names with the server's Host Name (or system name), if available. This requires the OMSA agent to be installed on the server. For more information about the OMSA agent, see the Dell OpenManage Server Administrator User's Guide available at dell.com/support/manuals. 4. To save the settings, click Apply. To restore the default slot name (SLOT-01 through SLOT-4) on the basis of a server's slot position) to a server, click Restore Default Value. Configuring iDRAC Network Settings To use this feature, you must have an Enterprise License. You can configure the iDRAC network configuration setting of a server. You can use the QuickDeploy settings to configure the default iDRAC network configuration settings and root password for severs that are installed later. These default settings are the iDRAC QuickDeploy settings. For more information about iDRAC, see the iDRAC7 User's Guide at dell.com/support/manuals. Configuring iDRAC QuickDeploy Network Settings Use the QuickDeploy Settings to configure the network settings for newly inserted servers. To enable and set the iDRAC QuickDeploy settings: 1. In the left pane, click Server Overview → Setup → iDRAC . 2. On the Deploy iDRAC page, in the QuickDeploy Settings section, specify the settings mentioned in the following table. For more information about the fields, see the Online Help. Table 8. QuickDeploy Settings Setting Description QuickDeploy Enabled Select the option to enable the QuickDeploy feature that automatically applies the iDRAC settings configured on this page to the newly inserted servers. The auto configuration must be confirmed locally on the LCD panel. Set iDRAC Root Password on Server Insertion Select the option to change iDRAC root password to match the value provided in the iDRAC Root Password field, when a server is inserted. iDRAC Root Password When the Set iDRAC Root Password on Server Insertion and QuickDeploy Enabled options are selected, this password value is assigned to a server's iDRAC root user password when the server is inserted into a chassis. The password can have 1 to 20 printable (including white spaces) characters. Confirm iDRAC Root Password Allows you to retype the password provided in the Password field. Enable iDRAC LAN Enables or disables the iDRAC LAN channel. By default, this option is cleared. Enable iDRAC IPv4 Enables or disables IPv4 on iDRAC. By default, this option is selected. 80